Fully automatic controls with auto flush, auto salinity and temperature output adjustment ( increases or decreases boost pump/s pressure to match sea water conditions)
Transits from warm to cold water adjusting product water output without assistance from the crew.
Filter assembly which includes , pre-filter and electrical control box with 2 x feed pump 12 or 24 volt
Most energy efficient water maker to date, 21 D.C. amps at 12 volts generates 340 gallons per day
All necessary plumbing see manual for full details
The addition of a low energy watermaker can be a life-changing upgrade for your cruising experience. Used properly, you will never have to go out of your way just to get questionable and/or expensive water or have to lift jerry cans out of the dingy. The SolarMaax 340 can easily make enough for you and your crew to shower every day, in addition it can pay for itself by being able to rinse salts off your boat and gear, reducing maintenance and replacement costs.
The SolarMaax 340 design is based on decades of real-world product testing and engineering from both Marine and Military applications ranging from supporting military operations in the mountains of Afghanistan, serious offshore yacht racing as well as tranquil anchorages around the world.
We are confident that you will be completely satisfied with your new system and stand behind our product with an industry leading warranty and customer support.
Please read the manual for full details prior to purchase.
The SolarMaax 340 GPD Compact 12 or 24 volt Level 2 fully automatic is a great choice for cruisers, with little space that needs energy efficiency. The system allows you to transit between different water temperatures without manual adjustments to the controls.
This SolarMaax model is lightweight, simple, super compact, easy to install and maintain, reliable and durable, with its diaphragm feed pumps in parallel, it can be run on a single pump for high efficiency or two pumps for high output. The Solarmaax uses the hydraulic enhanced Clark Pump intensifier an energy recovery device that sets a new industry standard for maximum efficiency. Where high output is needed when space is limited this is our best solution.
Due to super low consumption the system can be run on solar, wind or any Electromaax high output alternator. Longer cylinders in the Enhanced Clark pump make ALL SolarMaax water makers the quietest on the market. The system includes a complete installation kit, handheld salinity sensor, auto flush, product sample valve.
For 12 years, Electromaax has been manufacturing D.C. water makers. In that time Solar has become the primary source of energy for most serious cruisers. What was needed was a high output water maker that used the minimum of energy while maintaining the highest quality drinking water that the two 21” membranes are able to achieve.
Electromaax has a full 12 month limited warranty on ALL its enhanced Clark pumps. Other companies can charge more than $1,600.00 U.S.D for a rebuilt older Clark pump (under warranty more if out of warranty) and as high as $3,900.00 plus tax and shipping for a new one.
If properly maintained most Clark pump intensifiers will last decades, however sometimes though various circumstances beyond the owners control, they may need rebuilding. Electromaax now offers a 9 year extension for just $887.00 USD plus shipping both ways. This warranty extension is a type of insurance against forgetting to flush when left for months or years.
Electromaax Enhanced Clark Pump Warranty Rebuild Exchange Program
Have your Electromaax, high pressure “Enhanced Clark Pump” rebuilt or even exchanged by The Electromaax Factory.
Exchange program process 12 or 24 volt systems
– Once you receive a RMA, please Send us your enhanced Clark Pump to either Electromaax Canada or USA address
The factory will send you out at their discretion a rebuilt OR new pump. You only pay the shipping from either location back to you. The current turnaround time is 72 hours after receipt of your unit and acceptance that it meets the warranty conditions.
– The exchange pumps are in stock and as long as your returned Enhance Clark pump is 100% intact with no missing components. (if there are missing components the factory will quote fitting new ones)
– We will help you with any questions/concerns you may have when reinstalling the enhanced Clark pump.
For clients that are out of warranty, or not covered by any extended warranty we can rebuild or exchange any enhanced Clark pump for $1,555.00 USD (time of writing May 2023) this price may change without warning. The client pays any duties and taxes plus the shipping both ways.
Your Enhanced Clark pump MUST be 100% intact with no missing components, if you’re sending it in for rebuilt or even exchange. Again if there are missing components we will quote installing replacement ones.
CLARK PUMP MUST BE EITHER UNDER WARRANTY or EXTENDED WARRANTY
The warranty is voided by, but not limited to the following:
Using chemicals not supplied by or certified by Electromaax
Improper installation or operation
Be 100% intact with no missing components
You can only return the unit twice in the 9 year period
If you have any questions or concerns about the standard or extended 9-year Extended warranty of your system please contact us.
